Kayak Trolley
Kayaks come in all shapes and sizes so getting the right Trolley to match your Kayak is very important.
Firstly your kayak must not weigh Over 25g (contact us if you are unsure).
Then you need to Check that your Kayak has Scupper (drainage) holes.
Your Kayak rear Scupper holes size must be 26mm or wider in diameter (see fig 1).
You will need to measure (in millimetres or centimetres) the distance between the centres of the 2 holes (see fig 2).
Contact us with the Make and Model of your Kayak and tell us the measurement between the 2 holes and we will
send you out the correct Trolley for your Kayak.
(Not suitable for Tandem/double Kayaks)
 | Figure 1. This is how to measure the diameter of the scupper Hole. As long as the Rear Scupper hole size is 26mm or wider at the norrowest point all our Trolleys will fit. The Kayak used in this case is the older type Ocean Frenzy and the diameter of the scupper hole is 38mm or 3.8cms |
 | Figure 2. This is how to measure the distance between the rear 2 scupper holes. Place the tape measure or ruler between the Centres of the 2 holes. The Kayak used in this case is the older type Ocean Frenzy and the distance between the scupper holes is 325mm or 32.5cms |
